Login to Select.live Selectronic Australia
OI0009 Revision 01 Select.live User Manual 29
6 Login to Select.live
The web interface of Select.live can be accessed from two methods depending upon Wi-Fi
Ad-mode (Hotspot) and Wi-Fi normal mode or Ethernet. The web interface doesn’t have any
authentication; it can be accessed by anyone in the same network.
Note: Unauthorized access to your Select.live web interface is possible
Login via Wi-Fi normal mode or Ethernet
The Wi-Fi hotspot of the device is not available after the Setup Wizard. Either the device’s
Wi-Fi or Ethernet will be connected to a network. The web interface of the device can be
accessed by any PC or mobile device from the same network. Following is the procedure to
login to the web interface of the device
• After the Setup Wizard, the <IP address> of Select.live is displayed on the LCD screen
as shown.
• From the computer or mobile device connected on the same network, open a web
browser and enter http://<IP address> (e.g. http://192.168.43.130). The web link will
then redirect to Select.live web interface.
To Next Page
Loading...
