Selectronic Australia Select.live Operation
40 OI0009 Revision 01 Select.live User Manual
Updating new Firmware
Select.live checks for new firmware daily at midnight and will be updated within the
following 4 hours. The device can be forced to check for new firmware and update via the
web interface.
• Login into the device (see page 15)
• Click on ‘Advanced Settings’ in the upper right corner.
• Click on [Check for new Firmware] to check for new firmware available.
• If new firmware is available, the button changes to [Download Firmware] and the
firmware status changes “Firmware can be updated to x.x.x” from “Firmware is up-
to-date” as shown.
• Click on [Download Firmware] to download new firmware
• The firmware status changes to “Firmware update x.x.x download in progress…” and
the button to [Cancel Download] as shown.
• After download is complete, the firmware status changes to “Firmware update x.x.x
is downloaded and ready to install.” and the button to [Install Firmware Update] as
shown.
• On click [Install Firmware Update], the confirmation dialog box opens as shown.
To Next Page
Loading...
