Selectronic Select.live - Page 39

Select.live Operation Selectronic Australia
OI0009 Revision 01 Select.live User Manual 39
Parameter
Description
<DHCP Enabled>
DHCP of the Ethernet
• On – gets <Static IP address>, <Static IP Netmask>,
<Static IP Gateway> and <Static IP DNS server>
automatically and are disabled.
• Off – manual input of <Static IP address>, <Static IP
Netmask>, <Static IP Gateway> and <Static IP DNS
server>
<Hostname>
Hostname – can be any name or empty
<Static IP address>
Manual input of IP address. Enabled only on <DHCP Enabled>
as off
<Static IP Netmask>
Manual input of Netmask address. Enabled only on <DHCP
Enabled> as off
<Static IP Gateway>
Manual input of gateway address. Enabled only on <DHCP
Enabled> as off
<Static IP DNS server>
Manual input of DNS address. Enabled only on <DHCP
Enabled> as off. 0.0.0.0 for disabled
[Update]
Submits form. On successful – updates the Ethernet
connection and close the dialog box.
Note: only update of change but not applied yet
[Cancel]
On click – closes the dialog box
[x]
On click – closes the dialog box
• Choose <DHCP Enabled> as on or off
• Enter <hostname>
• Enter <Static IP address> for <DHCP Enabled> off
• Enter <Static Netmask address> for <DHCP Enabled> off
• Enter <Static Gateway address> for <DHCP Enabled> off
• Enter <Static DNS server> for <DHCP Enabled> off
• Click [Update] to update changes
• Click [Apply Network Changes] from Advanced Setting Page to apply changes.
Ethernet connection is successfully changed.
Note: This will override the network method preference. Ethernet will be
preferred over Wi-Fi.