Selectronic Select.live - Adding System to Profile

Installation and Commissioning Selectronic Australia
OI0009 Revision 01 Select.live User Manual 23
• Click on [Add a System].
• Fill in the form by entering <Device ID> and <Serial> of your Select.live.
• If you are the owner of the system then leave <Access Required> as Owner.
• If you are the installer and wish to add this system to your profile then you will need
to:
o Check that the owner of the system has first added the system to their
profile.
o Check that the owner has granted Installer Access under Settings.
o Obtain the Device ID and Serial from the owner.
o <Add a System> to installer’s profile.
o Under <Access Required> select “Installer” (see above).
• Click [Add System] to link Select.live to account.