Selectronic Select.live - Page 37

Select.live Operation Selectronic Australia
OI0009 Revision 01 Select.live User Manual 37
Parameter
Description
[Refresh]
Scan for the Wi-Fi networks. Update the list on <Available
Access Points>.
<Available Access
Points>
List of available Wi-Fi network (SSID) (pick only) Update on
click of [Refresh]. On select updates <SSID> and <Encryption>
<SSID>
Wi-Fi network name SSID
<Encryption>
Wi-Fi network’s password type. “none”, “WEP”, “WPA” and
“WPA2”
<Password>
SP PRO login password. Defaults to “Selectronic SP PRO”
[Update]
Submits form. On successful – updates the Wi-Fi connection
and close the dialog box.
Note: only update of change but not applied yet
[Cancel]
On click – closes the dialog box
[x]
On click – closes the dialog box
• Click [Refresh] to update <Available Access Points>
• Pick your Wi-Fi network from <Available Access Points>
• Enter <Password> if any
• Click [Update] to update changes
• Click [Apply Network Changes] in the Advanced Settings page to apply changes.
Wi-Fi connection is successfully changed.
Note: This will override the network method preference. Wi-Fi will be preferred
over Ethernet.