OmniHub CMP201– User Manual
Page 52 of 103
Advanced Parameters
The CE-HDMI-02module support total two sets of audio and video input. Each set includes 1
HDMI port/1 component portand1 analog port. It supports dual audio encoding per channel.
Dual audio all come from HDMI input with the same content and the encoding format can be the
same or different;
3.3.8.3 Module IP Output
This feature is specifically for single program encoding and IP output directly. By using this
way to output, it will not occupy baseboard multicast bandwidth.
If you want to use IP output channel in the encoder module and baseboard IP module at same
time, you should avoid the multicast IP addresses confliction. If there are two same IP
addresses enable meantime, all the multicast video will be affected.
• Destination IP Address and Destination Port: Using for multicast IP addresses or
unicast IP addresses and ports.
• Enable Destination MAC: Generally, you do not need to enable this option. This is
reserved for exceptional case when the unicast stream cannot be received by using
unicast IP addresses, you can enable destination MAC and streaming out by setting
Destination MAC.
3.3.8.4 EAS Settings
To Next Page
Loading...
