OmniHub CMP201– User Manual
Page 29 of 103
*As you notice, the Status on IP input and IP output are similar in comes on TS analysis and
Service List. These 2 tab are all available in All modules status page. Same goes to Service
Configuration when we output service to other output modules like QAMA, QAMB, OFDM, IP,
etc.,
3.2.5 Admin
Click Admin you can choose to go into Password setting page or Log Out.
3.3 Module Configuration
Receiver Modules
3.3.1 CR2-DVBC-00
CR2-DVBC-00 is a 4-channel DVBC receiving and descrambling module with 1 RF female
connector and 2 CI slots. It can receive 4 RF channels signal simultaneously and support 2
CAM cards for descrambling.
To Next Page
Loading...