OmniHub CMP201– User Manual
Page 71 of 103
For the LCN or Logical Channel number. This created the same way with Cable Descriptor. On
1 frequency, you will Add NIT Stream and create multiple TSID. Here you will add the LCN on
each TSID.
In adding the LCN, click LCN Descriptor. A small window will appear, click the select service on
the upper right corner and select the program name. Make sure that the name is on the correct
TS where you are adding the LCN. Lastly, input the Channel number you want that program to
appear. Note that the STB sorting settings should be also in LCN. STB have other sorting
settings like By Name, By Frequency, By Service ID, By LCN.
To Next Page
Loading...
