SERVOPRO NOx Analyzers Page
Press to turn On or Off the AK Status Line. The current setting is shown on the
Diagnostics menu on the right side of the screen after the (…). Example: Status Line
Off.
DIAGNOSTIC VALUES
→
→
→
or
→
Temperatures Screen
These important screens are accessed by pressing from the Diagnostics menu.
The first screen that appears is the Temperatures screen. The Temperatures screen
displays the current temperature and low and high alarm limits for key analyzer
components.
As indicated at the bottom of the screen, use the left and right arrow keys
to
scroll to different screens. The current screen will be highlighted (Temps in the example).
NOTE: The Diagnostic Values screens allow the operator to check analyzer
temperatures, sample and air pressures, EPC voltage percentages and flows.
To Next Page
Loading...
