Servomex SERVOPRO - Page 110

SERVOPRO NOx Analyzers Page
109
STATUS LINE
→ → →
This field contains the current AK Protocol information. See
AK Protocol. The current
status is shown in the upper-right corner of the Status Line menu.
Example above: Status Line OFF
From the Diagnostics menu, press to select On or Off.
Press from the Status Line menu to turn the AK Status Line On.
Press from the Status Line menu to turn the AK Status Line Off.
Example of the Status Line turned on: 3: SMAN
NOTE: The AK Command Status Line can be displayed at the top of the Measure
Screen.