SERVOPRO NOx Analyzers Page
From the I/O Status menu, press to view Programmable Digital Output statuses.
As indicated at the bottom of the screen, press the left and right arrow buttons
to view the next or previous page of Programmable Digital Output statuses.
The column key is as follows:
Column Key Description
Aux Pin Auxiliary connector on the back panel and pin number on the
Programmable digital output number
Function Operator-programmed function
The state the programmed relay is in (open or closed)
NOTES:
To set functions, see
Programmable Digitals.
Programmed statuses are closed when true.
Programmed alarms are open when true.
NOTE: The Programmable Digital Outputs screen allows the operator to check the
status of the analyzer’s programmable digital outputs (Open or Closed) according to
pin numbers and programmed functions.
To Next Page
Loading...
