SERVOPRO NOx Analyzers Page
To access the Analyzer Digital Inputs status screen, press from the I/O Status menu.
As indicated at the bottom of the screen, press the left and right arrow buttons
to scroll to different Analyzer Digital Input screens.
The Pin column indicates the connector and the pin number that are used to control the
function. In the example (M12), M is the Main Connector on the analyzer’s back panel,
and 12 is the Pin Number on that connector. The abbreviations are as follows:
M = Main Connector
A = Auxiliary
Int = Internal, for SERVOMEX use only.
When the analyzer is in Remote Mode and the digital input is pulled to digital ground
(Main Connector, Pin 6), the status will become Closed.
PROGRAMMABLE DIGITAL OUTPUTS
→
→
→
→
NOTE: The Analyzer Digital Inputs screen allows the operator to view the status of an
analyzer input (Open or Closed) and where to find the corresponding pin number.
NOTE: These analyzer functions are not user-changeable and have static pin outs.
These screens are for viewing only.
To Next Page
Loading...
