Servomex SERVOPRO - Page 112

SERVOPRO NOx Analyzers Page
111
Press to access the Measure Settings menu. These setup screens allow the operator
to view or change averaging times, NO/NO
x
/NO
2
mode times and NO
x
correction factors.
Press to access the Output Settings menu. The Programmable Analog and
Programmable Digital outputs can be viewed or set up to fit the operator’s needs.
Press to view or change the current TCP/IP parameters.
Press to access the Data Logging Time screen. (For SERVOMEX use only.)
Press to view or make changes to the Auto Start Settings.
Press to view or change the analyzer’s time and date.
MEASURE SETTINGS
→ → →
NOTE: The Measure Settings menu provides access to the following Setup
parameters: Averaging Time, NO/NO
x
/NO
2
Mode Times and NO
x
Correction Factors.