SERVOPRO NOx Analyzers Page
Programmed digital output alarms will not be affected by this setting; only the display will be
turned off. The scrolling alarms will be replaced with the SERVOMEX phone number when an
alarm is active. If there are no alarms, only the date and time will be displayed.
Press from the Alarms Menu to access this menu. The current setting is shown in the upper-
right corner of the Alarm Display menu. (In the above example, On.)
From the Alarm Display On/Off menu:
Press to turn the Alarm Display On.
Press to turn the Alarm Display Off.
NOTE: The Alarm Display On/Off menu allows the operator to turn On or Off the
Alarm Display that scrolls across the bottom of the Measure screen.
To Next Page
Loading...
