Servomex SERVOPRO - Page 169

SERVOPRO NOx Analyzers Page
168
AATK: Query Auto Calibration Parameters
Command Response Description
_AATK_K0 _AATK_s_z_y_x z: 1) NO mode
2) NO
x
mode
y: 1) ALL gases
2) Zero gas only
x: 1) NO
x
only
2) NO
x
+ O
2
3) O
2
only
ADAL: Diagnostic Alarm Limits
Command Response Description
_ADAL_K0 _ADAL_s_a1.min_a1.max_....
_a16.min_a16max
Set all alarm limits (numbers and descriptions)
1. Sample pressure
2. Air pressure
3. Oven temperature
4. Converter temperature
5. Pump temperature
6. Diode temperature
7. Cell temperature
8. Peltier gas temperature
9. EPC coil sample voltage percent
10. EPC coil air / ozone voltage percent
11. Reserved
12. Concentration 1 / Concentration 2
13. O
2
detector temperature
14. Reserved
15. Reserved
16. O
2
Concentration 1 / Concentration 2