Servomex SERVOPRO - Page 174

SERVOPRO NOx Analyzers Page
173
x.x: Range 3
w.w: Range 4
ARAW: Raw Detector Volts
Command Response Description
_ARAW_K0 _ARAW_s_z.z_t Raw detector volts
t = Timestamp (1/10 sec.)
_ARAW_K1 _ARAW_s_z.z_t Raw detector volts, K1 for O
2
with option
t = Timestamp (1/10 sec.)
ARMU: Raw Engineering Value
Command Response Description
_ARMU_K0 _ARMU_s_z.z_y.y_x.x_t Raw engineering value before linearization,
offset and span correction for all channels.
These are the values used to calculate the
polynomial coefficients.
t = Timestamp (1/10 sec.).
_ARMU_Km _ARMU_s_z.z_t Raw engineering value before linearization,
offset and span correction for channel m.
These are the values used to calculate the
polynomial coefficients.
t = Timestamp (1/10 sec.).
ASTF: Error Status
Command Response Description
_ASTF_K0 _ASTF_s_f1_f2_f3_...f25 Current error numbers are responded.
1. Check sample pressure
2. Check air pressure
3. Check oven temperature
4. Check converter temperature