Servomex SERVOPRO - Page 177

SERVOPRO NOx Analyzers Page
176
ATCP: Query TCP/IP Settings
Command Response Description
_ATCP_K0 _ATCP_s_zzz.zzz.zzz.zzz
_yyy.yyy.yyy.yyy
_xxxx
TCP/IP settings.
zzz: TCP/IP address
yyy: TCP/IP subnet mask
xxxx: TCP/IP port
ATEM: Temperatures
Command Response Description
_ATEM_K0 _ATEM_s_z.z_y.y_x.x…… Temperatures.
1. Oven temperature
2. Converter temperature
3. Pump temperature
4. Diode temperature
5. Cell temperature
6. Chiller temperature
7. O
2
detector temperature
8. Case temperature
_ATEM_K0_x _ATEM_s_xtemp Temperature of x
AUDP: Query UDP Data Streaming Parameter
Command Response Description
_AUDP_K0 _AUDP_s_<UDPPort>
<DataFrequency>_[<Mode>]
_[<UDP_IP>]_[Data]_[On/Off]
UDP port: opened for connection
Data Frequency: transmission frequency of the
data in Hz
Mode: A: ASCII Mode
UDP_IP: alternative IP address open for the
UDP connection when it should use the IP
connected to the TCP/IP client.
Data: Commands to be streamed over UDP.