Servomex SERVOPRO - Page 182

SERVOPRO NOx Analyzers Page
181
2) Zero gas only
x: 1) NO
x
only
2) NO
x
+ O
2
3) O
2
only
EDAL: Set Diagnostic Alarm Limits
Command Response Description
_EDAL_K0_ai.min_
a1.max_..._a16max
_EDAL_s Sets all alarm limits (numbers and descriptions)
1. Sample pressure
2. Air pressure
3. Oven temperature
4. Converter temperature
5. Pump temperature
6. Diode temperature
7. Cell temperature
8. Peltier gas temperature
9. EPC coil sample voltage percent
10. EPC coil air / ozone voltage percent
11. Reserved
12. Concentration 1 / Concentration 2
13. O
2
detector temperature
14. Reserved
15. Reserved
16. O
2
Concentration 1 / Concentration 2
_EDAL_K0_x_
x.min_xmax
_EDAL_s Sets alarm limit of x (x = 1-16)
EEFF: NO
x
Offset and Correction Factor
Command Response Description
_EEFF_K0 _EEFF_s_z.z_y.y zz: NO
x
offset