SEW-Eurodrive MAXOLUTION MAXO-MS - Electrical installation; Startup and operation; Inspection;maintenance

2
Safety notes
Electrical installation
Assembly and Operating Instructions – MAXO-MS/M/SM-GIOP Sensor Module
10
2.8 Electrical installation
The preventive measures and protection devices must comply with the applicable reg-
ulations (e.g. EN60204-1 or EN61800-5-1).
2.9 Startup and operation
Damaged products Never install damaged products. Submit any complaint to the shipping company im-
mediately in the event of transportation damage. Do not start up damaged products.
2.10 Inspection/maintenance
Never open the device. Only SEW‑EURODRIVE may repair the device.
26868113/EN – 03/2021