Sharp AQUOS Crystal - Turn Your Phone on and off

Get Started 18
l InsertingthemicroUSBpluginthewrongorientationmaydamagethecharger/accessory
jackonthebottomofyourphone.Insertaftercheckingthecontoursandorientationofthe
microUSBplug.
2. InserttheUSBplugonthemicroUSBcableforPCintotheUSBportonyourcomputer.
Afterchargingiscomplete,theLEDgoesout.
l MakesurethattheLEDglowsred(whenthebatteryisalmostfullycharged,itglowsgreen).
3. Aftercharging,removethemicroUSBcablefromboththephoneandthecomputer.
Turn Your Phone On and Off
Theinstructionsbelowexplainhowtoturnyourphoneonandoff.
Turn Your Phone On
n PressandholdthePowerkeyuntilthescreendisplays“SHARP”.
Yourphonewillpoweron.Dependingonthesettings,youmayseethelockscreen.
l Whenusingthephoneforthefirsttime,besuretochargeitfirstbeforeturningiton.Ifthe
batterylevelislow,thephonemaynotturnon.
l SeeLockandUnlockYourScreenandScreenLockforinformationaboutusingthescreen
lock.
l Thefirsttimeyouturnthephoneon,youwillseethestartupscreens.SeeCompletethe
SetupScreensfordetails.
l Ifyourphoneisnotyetactivated,seeActivateYourPhoneformoreinformation.