7-36
SYSTEM SETTINGS
Network Settings
*1 Depending on your machine specifications, only the items under "General Setting" will be displayed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
*3 The productivity kit is required.
Card Shot Settings
7-73
Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
Initial Tab Copy Setting 10 mm (1/2") 7-73
Disabling Deletion of Job Programs Disabled 7-74
Disabling of Bypass-Tray in Duplex Copy Disabled 7-74
Disabling of Auto Paper Selection Disabled 7-74
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-74
B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-74
B/W Quick Scan from Document Glass Enabled 7-74
l
Colour Adjustments 7-75
Initial Colour Balance Setting Factory default state 7-75
Auto Colour Calibration – 7-75
Item Factory default setting Page
n Network Settings
7-76
l
General Setting*
1
7-76
IPv4 Settings DHCP 7-76
IPv6 Settings Disabled 7-76
Enable TCP/IP Enabled 7-76
Enable NetWare Disabled 7-76
Enable EtherTalk Disabled 7-76
Enable NetBEUI Disabled 7-76
Reset the NIC – 7-76
Ping Command – 7-76
l
Connection Type Switching*
1
7-77
l
Wireless Settings*
1
7-77
l
NAS Setting*
2, 3
7-77
Item Factory default setting Page
To Next Page
Loading...
