122
6.
Press the
I
key to move the cursor to “TAXABLE 1”, then
program the machine to set “non-taxable 1” as follows:
• Press the
P
key to select “NO”.
l
Selective entry
NOTE
The
P
key toggles between two options as follows:
NO
l
YES
l
NO
l
....
Pressing the
s
key displays all pertinent options.
7.
Select one of the following actions:
• To cancel the programming, press the
c
key. A
confi rmation window appears to ask you whether to save
the data; select the option you prefer.
• To fi nalize the programming, press the
A
key, then press
the
c
key. You will return to the “DEPARTMENT” window.
•
To program for the following department, press the
key.
The “02” window will appear. To return to the “01” window,
press the
key.
The following sections describe how to program each item which is contained in a programming group.
To Next Page
Loading...
