Sharp ER-A421 - Article Programming

123
Article Programming
Use the following procedure to select any option included in the article programming group:
Procedure
▼
1.
In the SETTING window, select “1 ARTICLE”.
• The ARTICLE window will appear.
2.
Select any option from the following options list.
1 DEPARTMENT
Departments
2 PLU/EAN
PLUs/EANs
3 PLU RANGE
A range of PLUs
4 SET PLU TABLE
Set PLU table
5 LINK PLU/EAN TBL
Link PLU/EAN table
6 CONDIMENT TABLE
PLU condiment table
7 PROMOTION TABLE
Promotion table
8 EAN NON-PLU
EAN Non-PLU type code format
9 PRESS CODE
Press code
10 PLU/EAN STOCK
PLU/EAN stock quantity
11 EAN DELETE
EAN delete
12 PLU GROUP
PLU group text
The following illustration shows those options included in this programming group.
1 ARTICLE 1 DEPARTMENT
l
See “Department” on page 124.
2 PLU/EAN
l
See “PLU/EAN” on page 126.
3 PLU RANGE
l
See “PLU range” on page 128.
4 SET PLU TABLE
l
See “Set PLU table” on page 129.
5 LINK PLU/EAN TBL
l
See “Link PLU table (for PLU/EAN link)” on
page 129.
6 CONDIMENT TABLE
l
See “PLU condiment table” on page 130.
7 PROMOTION TABLE
l
See “Promotion table” on page 132.
8 EAN NON-PLU
l
See “EAN Non-PLU code format” on page 134.
9 PRESS CODE
l
See “Press code (for EAN)” on page 135.
10 PLU/EAN STOCK
l
See “PLU/EAN stock” on page 136.
11 EAN DELETE
l
See “EAN delete” on page 136.
12 PLU GROUP
l
See “PLU group text” on page 136.