15
■
Inserting the keyboard sheet
Insert the keyboard sheet between the keyboard cover and the cabinet as illustrated below.
Keyboard cover
Keyboard sheet
1.
Lift up the keyboard cover.
2.
Insert the keyboard sheet into the slit.
3.
Close the keyboard cover.
NOTE
• Do not spread the keyboard cover too far as it might tear.
• Replace the keyboard sheet with a new one if by chance it gets wet. Use of a wet keyboard
sheet may cause problems.
• Be sure to use only SHARP-supplied keyboard sheets. Thick or hard sheets make key
operations diffi cult.
• Smooth the keyboard sheet evenly under the keyboard cover, without any folds or wrinkles, to
ensure easier operation.
• If you require a new keyboard sheet, please contact your dealer.
• The keyboard cover will eventually wear out. If your keyboard cover is dirty or broken, replace
the cover with a new one. For details, contact your authorized SHARP dealer.
To Next Page
Loading...
