159
Terminal Programming
Use the following procedure to select any option included in the terminal group:
Procedure
▼
1.
In the SETTING window, select “8 TERMINAL”.
• The TERMINAL window will appear.
2.
Select any option from the following options list:
• MACHINE# (Use the numeric entry)
Machine number (max. 6 digits: 0 to 999999)
• CONSECUTIVE# (Use the numeric entry)
Enter a number (max. 4 digits: 0 to 9999) that is the
desired starting number.
• DRAWER ALARM (Use the numeric entry)
Alarm length of time with drawer opening (0 to 255
seconds)
If the number “0” is entered, alarm is disabled.
• SCREEN SAVE (Use the numeric entry)
Screen save mode timer (max. 2 digits: 0 to 99 minutes)
If the number “0” is entered, the register will turn the
display off after 100 min., if it remains idle.
• WAITING TIME (Use the numeric entry)
Waiting time until a message starts scrolling on the
customer display (max. 3 digits: 0 to 999 seconds)
If the number “0” is entered, no message is displayed.
• VAT ID (Use the numeric entry)
VAT ID is an identifi er used in Netherlands, Norway and
Sweden.
For Netherlands and Norway, enter 9 digits (000000000 to
999999999).
For Sweden, enter 10 digits (0000000000 to 9999999999).
To Next Page
Loading...
