Sharp ER-A421 - VMP Configuration Programming

184
VMP Confi guration Programming
Procedure
▼
1.
In the SETTING window, select “17 VMP CONFIG”.
• The VMP CONFIG window will appear.
2.
Program each item as follows:
• PASSWORD (Use the numeric entry)
Normal password (0 through 9999)/“0”: No password
• VMP1 PASSWORD (Use the numeric entry)
VMP1 password (0 through 9999)/“0”: No password
• VMP2 PASSWORD (Use the numeric entry)
VMP2 password (0 through 9999)/“0”: No password
• VMP3 PASSWORD (Use the numeric entry)
VMP3 password (0 through 9999)/“0”: No password
• VMP1 ID (Use the numeric entry)
VMP1 ID (max. 10 digits)
• VMP2 ID (Use the numeric entry)
VMP2 ID (max. 10 digits)
• VMP3 ID (Use the numeric entry)
VMP3 ID (max. 10 digits)