Sharp ER-A421 - EAN Non-PLU code format

134
■
EAN Non-PLU code format
EAN-13 type
2
Flag
(02 or 20-29)
Free format
Field 1 Field 2
Free format area
Price check digit
EAN-8 type
Flag
Free format
Procedure
Program each item as follows:
Select a arbitrary number, or a
pertinent EAN TYPE OF CODE &
SYSTEM CODE you set.
▼
NOTE
To delete a code format in the “EAN NON-PLU”
window, select the code format and press the
;
key.
A confi rmation window appears to ask you whether to
delete the code format, select the option you prefer.
• TYPE OF CODE (Use the selective entry)
EAN-8: EAN-8 format code (consisting of 8 digits)
EAN-13 (UPC-A): EAN-13 format code (consisting of
13 digits)
• SYSTEM CODE (Use the numeric entry)
System code (i.e. fl ag code): EAN-8: 1 digit, EAN-13: 2 digits
NOTE
ISBN/ISSN and press code are always used the fi xed
format even if code 37, 43, 78, 98, or 97 is entered.
• LENGTH FLD#1 (Use the numeric entry)
Length of fi eld 1 (number of digits): 0 to 9
• LENGTH FLD#2 (Use the numeric entry)
Length of fi eld 2 (number of digits): 0 to 9
• FLD#1 DATA
Meaning of fi eld 1: It is fi xed to FREE.
• FLD#2 DATA (Use the selective entry)
Meaning of fi eld 2
PRICE: Price
QUANTITY: Quantity
• CHECK DIGIT (Use the selective entry)
Price check digit
YES: Use the price check digit
NO: Not use the price check digit
• TAB (Use the selective entry)
TAB or decimal point of fi eld: 3/2/1/0