147
■
Credit key (Credit1 through Credit9)
Procedure
Program each item as follows:
Select a pertinent credit key from
the credit keys list.
▼
The screen continues.
• TEXT (Use the character entry)
Description for the credit key. Up to 12 characters can be
entered.
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99
• BILL PRINT (Use the selective entry)
COMPULSORY: Compulsory bill printing
NON-COMPUL.: Non-compulsory bill printing
• FOOTER PRINT (Use the selective entry)
This item decides whether or not your register should print a message at the foot of a receipt when a
specifi ed credit key is used.
YES: Enables footer printing on the receipt.
NO: Disables footer printing on the receipt.
• AMOUNT ENTRY (Use the selective entry)
COMPULSORY: Makes amount tendered entry compulsory.
INHIBITED: Inhibits amount tendered entry.
• NON-ADD# (Use the selective entry)
COMPULSORY: Compulsory non-add code entry
NON-COMPUL.: Non-compulsory non-add code entry
• EFT (Use the selective entry)*
COMPULSORY: Makes EFT function compulsory.
NON-COMPUL.: Makes EFT function non-compulsory.
• DRAWER OPEN (Use the selective entry)
YES: Opens the drawer.
NO: Disables the drawer opening.
• CHANGE DUE (Use the selective entry)
DISABLE: Disables change calculation.
ENABLE: Enables change calculation.
* For details on the use of this device, consult your authorized SHARP dealer.
To Next Page
Loading...
