Sharp MX-7090N - Page 620

7-23
SYSTEM SETTINGS►SETTING MODE LIST
• Display Mode Keys on Home Enabled No Yes
 Keyboard Settings No Yes
 Default Keyboard Setting No Yes
• Keyboard Select English (US) No Yes
• Set Keyboard Priority External Keyboard No Yes
 Soft Keyboard Template Setting – No Yes
 Device Control No Yes
 Original Size Detector Setting No Yes
• Original Detection Size Combination Inch-1 No Yes
• Cancel Detection at Document Glass Disabled No Yes
 Original Feeding Mode All Off No Yes
 Automatic Saddle Stitch*
4
Enabled No Yes
 Saddle Fold/Stitch Position Adjust*
4
– No Yes
 Paper Type for Auto Paper Selection Plain Paper 1, Plain Paper 2 No Yes
 Plain Paper Compatibility Settings Plain Paper 1 No Yes
 Tandem Connection Setting No Yes
• IP Address of Client Machine 0.0.0.0 No Yes
• Port Number 50001 No Yes
• Tandem Mode No Yes
- Disabling of Master Machine Mode Disabled No Yes
- Disabling of Client Machine Mode Disabled No Yes
 Detect Standard in Auto Color Mode 3 (Normal) No Yes
 Status Indicator Setting*
5
Pattern 1 No Yes
• Status Indicator will blink if data is received*
5
Enabled No Yes
 Auto Switching of Finisher Trays*
6
Enabled No Yes
 Total Setting for Finish Specify Finishing Position Based
on Paper Selected.
No Yes
 Paper Weight Setting*
7
No Yes
• Paper Weight 16 to 23 lbs. (60 to 89g/m
2
) No Yes
 Data List One Sided No Yes
 Disabling of Duplex Disabled No Yes
 Disabling of Offset Disabled No Yes
 Disabling of Stapler*
4
Disabled No Yes
 Disabling of Punch*
8
Disabled No Yes
 Disabling of Color Mode*
9
Disabled No Yes
 Disabling of Document Feeder Disabled No Yes
Setup Items Factory default setting U A