Sharp MX-7090N - Page 621

7-24
SYSTEM SETTINGS►SETTING MODE LIST
 Disabling of Large Capacity Cassette*
10
Disabled No Yes
 Disabling of Tray Settings Disabled No Yes
 Disabling of Inserter*
11
Disabled No Yes
 Disabling of Finisher*
4
Disabled No Yes
 Disabling of Folding Unit*
12
Disabled No Yes
 Disabling of Trimming Module*
13
Disabled No Yes
 Enable/Disable Settings No Yes
 User Control No Yes
• Disabling of Printing by Invalid User Disabled No Yes
 Copy Function Settings No Yes
• Disabling of Registration/Deletion of Program Disabled No Yes
• Disabling of Bypass-Tray in Duplex Copy Disabled No Yes
• Disabling of Auto Paper Selection Disabled No Yes
• Disabling Registration of Custom Image Disabled No Yes
• Disabling sending while copying Disabled No Yes
 Printer Settings No Yes
• Prohibit Notice Page Printing Enabled No Yes
• Prohibit Test Page Printing Disabled No Yes
• Exclude Bypass-Tray from Auto Paper Select Disabled No Yes
• Disabling of USB Memory Direct Print Disabled No Yes
• Disabling of Network Folder Direct Print Disabled No Yes
• Disabling sending while printing Disabled No Yes
• Disable Blank Page Print Disabled No Yes
 Image Send Settings No Yes
• Disable Switching of Display Order Disabled No Yes
• Disable Scan Function All Invalid No Yes
• Settings to Disable Registration No Yes
- Disable Registering Destination from Operation
Panel
All Invalid
No Yes
- Disable Registering Destination on Web Page All Invalid No Yes
- Disabling of Registration/Deletion of Program Disabled No Yes
- Disable Destination Registration Using Global
Address Search
All Invalid
No Yes
- Disabling of Forwarding via Network Disabled No Yes
• Settings to Disable Transmission No Yes
- Disable [Resend] on Image Send Mode Disabled No Yes
Setup Items Factory default setting U A