2-61
PRINTING
4
Printing a selected file.
The number of selected files appears in the number of selected
files display.
If you wish to use the number of copies that was stored with the
file, go to step (3).
(1) Select the [Apply the Number from Stored
Setting of Each Job] checkbox so that it is
not selected ( ).
(2) Set the number of copies.
Select the number with the keys and use the
keys to move the frame to the next place.
After entering the number, press the [OK] key.
☞ "Entering numbers" (page 1-9) in "1. BEFORE
USING THE MACHINE".
(3) Select the [Print and Delete] key or the
[Print and Save] key.
• If the [Print and Delete] key is selected, the files will be
automatically deleted after printing.
• If the [Print and Save] key is selected, the files will be
saved after printing.
OKBACK
OK
BACK
(3)
(2)
(1)
To Next Page
Loading...
Need help?
General
