1-73
BEFORE USING THE MACHINE
CLEANING THE PT CHARGER
If black or coloured lines still remain after the main charger have been cleaned, use the PT charger cleaner to clean the
PT charger.
1
Press the [POWER] key ( ) on the
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
2
Open the front cover and remove the
toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER (page 1-52)
Do not point the holes down as used toner will spill out.
3
Clean the PT charger.
(1) Slowly pull the PT charger cleaner out until
you feel a slight resistance.
(2) Slowly push the PT charger cleaner back in.
(3) Repeat the above (1) to (2) three times.
4
Install the toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER (page 1-52)
(1)
(2)
To Next Page
Loading...
