Sharp MX-C380P

1-38
BEFORE USING THE MACHINE
Types of paper that can be used in each tray
The following types of paper can be loaded in each tray.
"
–" in the table indicates "cannot be used".
*1 "Heavy paper" is heavy paper up to 209 g /m
2
(110 lbs. index).
*2 Thin paper from 55 g/m
2
to 59 g/m
2
(15 lbs. to 16 lbs.) can be used.
Print side face up or face down
Paper is loaded with the print side face up or face down depending on the paper type and tray.
Trays 1 to 4
Load the paper with the print side face up.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face
down*.
Bypass tray
Load the paper with the print side face down.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face up*.
* If "Disabling of Duplex" (Web page only) is enabled in the system settings (administrator), load the paper in the normal
way (face up in trays 1 to 4; face down in the bypass tray).
Tray 1/Tray 2/Tray 3/Tray 4 Bypass tray
Plain paper Permitted Permitted
Pre-printed Permitted Permitted
Recycle Paper Permitted Permitted
Letter head Permitted Permitted
Pre-punched Permitted Permitted
Colour Permitted Permitted
Heavy paper*
1
– Permitted
Labels – Permitted
Glossy paper – Permitted
Transparency film – Permitted
Envelopes – Permitted
Thin paper*
2
– Permitted