1-45
BEFORE USING THE MACHINE
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of July, 2010)
PERIPHERAL DEVICES
Product name Product number Description
500-sheet paper feed unit
MX-CSX1
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
MX-CSX2
Finisher MX-FN12
Output device that enables the use of the staple function and
offset function.
When a finisher is installed, be sure to attach the finisher cover
(MX-CV10).
Finisher cover MX-CV10
When a finisher is installed, this cover protects the top of the
finisher.
Barcode font kit AR-PF1 Adds barcode fonts to the machine.
XPS expansion kit MX-PUX1
The machine can be used as an XPS compatible printer.
To install this kit, a 1 GB expansion memory board (MX-SMX3)
is required.
Expansion memory board MX-SMX3 This expands the memory that can be used on the machine.
Application integration module MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
Application communication module MX-AMX2
This allows the machine to be linked over a network to an
external software application.
External account module MX-AMX3
This is required to use an external account application on the
machine.
Some options may not be available in some countries and regions.
To Next Page
Loading...
Need help?
General
