3-24
SYSTEM SETTINGS
OPERATION PANEL (ADMINISTRATOR)
Operation Settings
Settings related to machine operation can be configured. Select the [Operation Settings] key to configure the settings.
Other Settings
Keys Touch Sound
This setting is used to adjust (or turn off) the volume of
the beep that sounds when you select a key.
Display Language Setting
The language that appears in the display can be changed.
Set Keyboard Priority
When an external keyboard is connected, you can select
whether the soft keyboard or the external keyboard is
used.
Machine Display Pattern Setting
One of the six colour patterns can be selected for the colour pattern in the display.
A sample of the selected pattern can be viewed.
Device Control
These settings control devices installed on the machine. Select the [Device Control] key to configure the settings.
Other Settings
Registration Adjustment
If the colours are out of place on the printed surface
when color printing is performed, the print positions of
the colours can be adjusted.
To perform this adjustment, select the [Auto Adjustment]
key. A message will appear. select the [Execute] key.
Optimization of a Hard Disk
This function optimizes the hard drive of the machine by
defragmenting data. If a job is in progress, a message
will appear and optimization will not begin until the job is
finished. During optimization, the following operations
are not possible:
• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of
the machine.
• Auto Power Shut-Off
When optimization is completed, the machine will
automatically restart.
When user authentication is enabled and a display
language is specified in the favourite operation group,
that setting is given priority.
When the print hold (retention) function is frequently
used and output of files seems somewhat slow,
optimizing the hard drive may improve performance.
To Next Page
Loading...
Need help?
General
