3-16
SYSTEM SETTINGS
OPERATION PANEL (ADMINISTRATOR)
This section explains the system settings that are configured by the administrator of the machine.
Accessing the System Settings (Administrator)
To access the system settings (administrator), the administrator must log in as explained below.
When User Authentication is not Enabled
When "User Authentication" (Web page only) is not enabled, follow the procedure below to log in.
Keys in the display can be selected with the arrow keys and the [OK] key.
SYSTEM SETTINGS (ADMINISTRATOR)
ON THE OPERATION PANEL
1
Select the [Admin Password] key.
2
Log in.
(1) Select the [Password] text box and enter the
administrator password.
Enter the administrator password in the administrator
password entry screen.
(2) Select the [OK] key.
This completes the administrator login procedure. The
system settings (administrator) can now be used.
• User authentication is initially disabled (factory default setting).
• To logout...
Press the [LOGOUT] key.
(If Auto Clear activates, logout will automatically take place.)
OKBACK
USB-Device Check
OKBACK
(2)
(1)
To Next Page
Loading...
Need help?
General
