3-58
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Printer Settings
Settings related to the printer function can be configured
Default Settings
Printer condition settings are described below. Select [System Settings] - [Printer Settings] - [Default Settings] in the
menu bar, and configure the settings.
Prohibit Notice Page Printing
This setting is used to disable printing of notice pages.
A notice page is printed when printing cannot be
executed as specified due to insufficient memory or
other reason. The notice page indicates the reason.
Prohibit Test Page Printing
This setting is used to disable printing of test pages.
When this setting is enabled, "Printer Test Page" in the
system settings cannot be used to print test pages.
A4/Letter Size Auto Change
When printing an 8-1/2 x 11" (A4) size image, this
setting allows A4 (8-1/2 x 11") size paper to be used if
8-1/2 x 11" (A4 ) size paper is not loaded.
Print Density Level
This lightens or darkens the print density of colour and
black and white images. The print density can be
adjusted to five levels.
CMYK Exposure Adjustment
This is used to adjust the density of cyan (C), magenta
(M), Yellow (Y), and Black (K). The density of each
colour can be adjusted to 17 levels.
Bypass Tray Settings
Enable Detected Paper Size in Bypass Tray
This is used to prohibit printing when the paper size
specified for a print job is different from the paper size
inserted in the bypass tray.
Enable Selected Paper Type in Bypass Tray
This is used to prohibit printing when the paper type
specified for a print job is different from the paper type
inserted in the bypass tray.
Exclude Bypass-Tray from Auto Paper Select
When [auto] is selected for paper type selection, the
bypass tray can be excluded from the trays that can be
selected. This is recommended when special media is
often placed in the bypass tray.
Job Spool Queuing
When this function is enabled, received print jobs are
displayed in the spool queue of the job status screen.
The jobs are moved to the job queue after they have
been analyzed by the machine. Multiple jobs that have
not yet been analyzed can appear in the spool queue.
When this function is disabled, received print jobs are
displayed in the job queue without being displayed in the
spool queue. However, when an encrypted PDF job is
printed, the job appears in the spool queue.
To Next Page
Loading...
Need help?
General
