2-83
PRINTING
CANCELLING A PRINT JOB
A job being printed, a job waiting to be printed, or a spooled job can be cancelled.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Press the [JOB STATUS] key.
2
Cancel the job.
(1) Change the print job status mode to [Spool]
or [Job Queue].
Select either of the keys with the keys
and press the [OK] key. The mode changes each time the
[OK] key is pressed.
(2) Select the key of the print job that you wish
to cancel.
(3) Select the [Stop/Delete] key.
(4) A message appears to confirm the
cancellation. Select the [Yes] key.
The selected job key is deleted and printing is cancelled.
It is also possible to cancel printing with the [STOP] key ( ) on the operation panel. When the [STOP] key ( ) is
pressed, a message will appear asking you if you want to cancel the job.
If you do not want to cancel the selected print job...
Select the [No] key in step (5).
JOB
STATUS
OKBACK
OKBACK
OKBACK
Spool
(3)
(4)
(1)
(2)
To Next Page
Loading...
Need help?
General
