Sharp MX-C380P User Manual

3-49
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Enable/Disable Settings
*1 When a 500-sheet paper feed unit is installed.
*2 When a finisher is installed.
*3 When a colour-related problem has occurred.
Item Factory default setting Page
■ Enable/Disable Settings
3-62
● Printer Condition Settings 3-62
X Disable Blank Page Print Disabled 3-62
● User Control 3-62
X Disabling of Printing by Invalid User Disabled 3-62
● Operation Settings 3-62
X Cancel Auto Clear Timer Disabled 3-62
X Disabling of Job Priority Operation Disabled 3-62
X Disabling of Bypass Printing Disabled 3-62
X Disable Auto Key Repeat Disabled 3-62
X Disabling of Clock Adjustment Disabled 3-62
● Device Control 3-62
X Disabling of Duplex Disabled 3-62
X Disabling of Optional Paper Feed Unit*
1
Disabled 3-62
X Disabling of Tray Setting Disabled 3-62
X Disabling of Offset*
2
Disabled 3-62
X Disabling of Stapler*
2
Disabled 3-62
X Disabling of Colour Mode*
3
Disabled 3-62
● Printer Settings 3-63
X Prohibit Notice Page Printing Enabled 3-63
X Prohibit Test Page Printing Disabled 3-63
X Exclude Bypass-Tray from Auto Paper Select Disabled 3-63
● Print Hold Setting 3-63
X Batch Print Settings
3-63 Selection of [All Users] is not allowed. Enabled
 Selection of [User Unknown] is not allowed. Enabled

Sharp MX-C380P Specifications

General

Brand	Sharp
Model	MX-C380P
Category	All in One Printer
Language	English