Sharp MX-M260 - Page 62

MX-M260/M310/M260N/M310N SIMULATION 6 - 29
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note:Executable only when the FAX is installed.
Operation/procedure
1. Select “1: COPY START.”
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and press
the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Item Setting range Default
1 COPY START – –
2 FAX EXP.LEVEL 0-99 50
46-13
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Normal mode individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content Setting range Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 503AE Normal text AE
4 MANUAL Normal text MANUAL
46-14
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Fine text mode individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 50
3 AE (PHOTO ON) Fine text AE (Half tone)
4 AE (PHOTO OFF) Fine text AE
5
MANUAL
(PHOTO ON)
Fine text MANUAL
(Half tone)
6
MANUAL
(PHOTO OFF)
Fine text MANUAL
46-15
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Super Fine mode individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 50
3 AE (PHOTO ON)
Super Fine AE
(Half tone)
4 AE (PHOTO OFF) Super Fine AE
5
MANUAL
(PHOTO ON)
Super Fine MANUAL
(Half tone)
6
MANUAL
(PHOTO OFF)
Super Fine MANUAL
46-16
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment
(Ultra Fine mode individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start – –
2 EXP.LEVEL Exposure level selection
0-99 50
3 AE (PHOTO ON) Ultra Fine AE (Half tone)
4 AE (PHOTO OFF) Ultra Fine AE
5
MANUAL
(PHOTO ON)
Ultra Fine MANUAL
(Half tone)
6
MANUAL
(PHOTO OFF)
Ultra Fine MANUAL