Sharp PC-1600

PC-l600
Step
5
RE1.5
Component I ExplanationPart No.
3
4
3-4
SP2 x 2.5
3-5
SP2 x 2.5
2-5
4-6
SP2 x 2.5
2-2
RE1.5
2-3
Paper holder installing plate (Ieft) I The paper holder installing plate (right) unit serves as a
unit fixer of the bearing or the platen roller unit (3·3), too.
Set it with the parallel part of the bearing up.
Phillips round head
screws (2)
Paper holder installing plate
(right) unit
Phillips round head
screws (2)
Pulley support rest (left) unit
Stopper
Phillips round head screw
Idler gear
Retaining ring (E type)
Pulley gear unit
Retaining ring (E type)
The screw-tightening torque is 2.5 kg/cm.
After tightening the screws, hook the paper holder
spring onto the hook of the paper guide A of the frame
(1-1 ).
Press the pulley support rest (Ieft) unit (2-5) into the
frame (1-1).
The screw-tightening torque is 2.5 kg/cm.
Set the pulley gear unit (2-3) to shift into double-gear
with the cog. (Mark the cog first.)
2-2
RE1.5
-76-