Sharp VC-A230X - M Editing from a Camcorder Toyour VCR; Specifications

m
Editing from a Camcorder toYour VCR
Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information
Camcorder (VIEWCAM)
To AUDIO/VIDEO IN terminals
AV
Select Position AV
Ia
Specifications
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL colour or monochrome (CCIR system B/G) signal
Maximum playing time: 480 minutes max. with E-240 tape (LP mode)
Tape width: 12.7 mm
Tape speed: 23.39 mm/set. (SP) , 11.70 mm/set. (LP)
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: 16 W (approx.)/l .O W Max (at Low Power Mode)
Operating temperature: 5°C to 40°C
Storage temperature: - 20°C to 55°C
Video input: 1 .O Vp-p, 7.5 Ohm
output: 1 .O Vp-p, 75 Ohm
Audio input: (phono type) Line: -8dBs, 47 kohm
output: (phono type) Line: -8dBs (approx.), 1 kohm
Dimensions: 360 (W) x 256 (D) x 92 (H) mm
Weight: 2.9 kg
Supplied accessories: R6 (AA, UM/SUM-3) battery x 2
75-ohm coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
30