l!§i
Menu Screen
@
Press MENU to display the MENU screen.
@
Select the item you want by pressing
A
or
‘I
on the remote control. Refer to
the pages listed below for details on each item.
The following 5 items can be set by using the On Screen Display (OSD).
.
.:SELECT
SET:ENTER MENU:EXIT
1: TIMER Setting a timer recording (and checking it). (See page
22 for the setting procedure.)
MENU screen is a home screen used to select various screen functions. A sub-
menu will appear once you select an item for the menu.
@
Turn on your TV and select the video channel.
@
Turn on the VCR. (See page 5, item 3.)
2: MODE ..,,,,,..................., VCR operating conditions are set according to the broadcast reception and tape
playback conditions. (See page 15.)
3: CHANNEL PRESET
,,,,..
Setting the channels. (See page 12.)
4: CLOCK
.,,,,,,....._.._.........
Setting the present time. (See page 11
.)
5: LANGUAGE Selection of language to be used for the On Screen Display. (See page
IO.)
@
Press SET. The screen changes to the item which you have selected.
@
To cancel the MENU screen, press MENU.
!!!A
OSD (On Screen Display)
The tape counter and VCR mode can be shown on the screen while you are playing back a tape or watching a
broadcast on the video channel.
ure)
-I--
-8
Simple
Recording timer
Clock disolav
Auto Repeat display
1-1
Calendar
display
rme
coun er
Tape remaining
---3)
DPSS>
l
If the clock is not set, the time
and date will not be displayed.
How to Display Indicators
0
Turn on your TV and select the video channel.
@
Turn on the VCR. Mode indicators are displayed in the AUTO display screen.
0
Each time MODE OSD is pressed, the screen changes as follows:
0
AUTO Display
4
@
FULL Display
d
@
COUNTER Display
d
@
Display off
t
AUTO Display
When each of the operation buttons, numeric button, or CHANNEL
A/v
(CH
A/v)
is pressed, the current
mode or the number of the channel will be displayed in the upper section of the TV screen for about 3 seconds.
l
When
you record
a video signal output from this VCR on another VCR, press
MODE OSD
to select Display Off. (If the mode
indicator is displayed on the screen, it is also recorded on the tape.)
9
To Next Page
Loading...
