20
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered.
PLU/subdepartment setting for 1 through 200 codes are available.
Unit price and associated department assignment
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU code, start from entering a unit price or an associated department code without
pressing the
A
key.
To program another PLU code, start from the beginning without pressing the
A
key.
To delete a PLU code, use the following sequence:
PLU code
pv
To delete the following PLU code
To delete another PLU code
A
PLU code
Unit price
Associated dept.
1
p
125
#
A
PrintKey operation example
PLU code
When the associated department is department 33-50:
p
ds
To program zero
Associated
dept. code
(33 to 50)
Unit price
(max. six digits)
A
*
2
PLU code
*1: To assign departments 17 through 32, press the department shift key.
p
To program zero
Unit price
(max. six digits)
A
D
*
1
Associated
Dept. key
*
2
7
PLU (Price Look-Up) and Subdepartment Programming
A113_1 Quick Start Guide 06.9.11 6:35 PM Page 20
To Next Page
Loading...
