Chassis maintenance (continued)
Place the motorcycle on a suitable stand.
Remove the front wheel (
☛
p.110)
Remove the fork protectors. Slide the dust cover
down. Clean and lubricate the dust cover and
the fork tube.
Lubrifiant universel Minerva F4
Reinstall the dust cover and clean off any left
over oil.
Reinstall the fork protection.
Reinstall the front wheel (
☛
p.110)
Take the bike off of the stand.
Place the motorcycle on a suitable stand.
Exert a back and forth force on the fork legs.
There should not be any play in the bearings in
any direction in the steering bearings.
If there is play and / or resistance, adjust and / or
change the bearings.
Adjust the bearing free play (
☛
p.105)
Take the bike off of the stand.
CLEANING THE FORK DUST SEALS
CHECKING THE PLAY OF THE STEERING HEAD BEARINGS
104
To Next Page
Loading...
Need help?
General
