SHERCO 2014 300 SE/R User Manual

A
2
1
2
1
2
1
ENGLISH
Brakes (continued)
- Remove the clip
1
and retaining pin
2
.
- Remove the brake pads.
Do not operate the front brake lever or rear brake
pedal when the brake pads are removed.
Check the pads for wear
Minimum pad thickness
A
≥1mm
If replacement is necessary, always change the
pads in pairs.
Check that the brake discs are not contaminated
with oil or grease. In they are, clean the discs
with brake cleaner.
Brake cleaner
Minerva brake cleaner
and degreaser
REMOVING THE FRONT AND REAR BRAKE PADS
CHECKING THE CONDITION OF THE BRAKE PADS
REINSTALLING THE FRONT AND REAR BRAKE PADS
117

SHERCO 2014 300 SE/R Specifications

General

Brand	SHERCO
Model	2014 300 SE/R
Category	Motorcycle
Language	English