SHERCO 2014 300 SE/R User Manual

250-300 SE/R
1
2
6
3
4
5
Motor setting (continued)
SETTING THE MAIN VALVES CABLE
- Remove the fuel tank avec the radiator side
panel (
☛
p.102)
- Remove the escape spring
1
- Remove the «Silent bloc»
2
- Remove the escape
3
- Remove the plastic cover
4
- Check the good stress of the cable with the
ignition key position ON , the pulley
5
must be
in the good position , if no, move the cable set-
ting
6
.
90

SHERCO 2014 300 SE/R Specifications

General

Brand	SHERCO
Model	2014 300 SE/R
Category	Motorcycle
Language	English