SHERCO 2014 300 SE/R User Manual

250-300 SE/R
21
1
2
1
Control devices and controls (continued)
Position
1
“Soft”
Position
2
“Hard”
n Injection system mapping switch
n Engine on / off switch (250-300 SE/R)
Deux positions possibles :
Position ON
1
. Le moteur peut être démarré.
Position OFF
2
. Le moteur est coupé et ne peut
pas être démarré.
n Motor emergency stop button (250-300 SE/R)
Two possible positions:
The button is released: in this position, the bike
can be ridden. The button is held down: in this
position the motor is Off when released the
motor can be restarted.
ATTENTION
- If you use the emergency stop button to stop the
motorcycle, do not forget to move the ON / OFF swit-
ch into the OFF position.
- If you do not, there is a risk that the battery will
discharge.-Under normal conditions, use the
ON / OFF switch to stop the bike.
76

SHERCO 2014 300 SE/R Specifications

General

Brand	SHERCO
Model	2014 300 SE/R
Category	Motorcycle
Language	English