37
3. Oil seal
4. Rear plate
NOTE: Apply the liquid gasket to around the M8
screw holes for rear plate.
Rear plate tightening torque:
22.6 – 28.4 N·m {2.3 – 2.9 kgf·m}
5. Fly wheel
Align the hole to the roll pin on the crankshaft.
Fly wheel tightening torque
69 – 78 N·m {7.0 – 8.0 kgf·m}
6. Piston and connecting rod assembly
① Coat the metal surface, piston and piston ring with
engine oil.
061X
062X
063X
064X
To Next Page
Loading...
