Shihlin electric SC3-043-2.2K User Manual

Application parameter group10
PARAMETER DESCRIPTION 143
5.10 Application parameter group 10
Group
Parameter
Number
Name
Setting Range
Factory
Value
Page
10-00
P.10
DC injection brake operation
frequency
0～120.00Hz
3.00Hz
142
10-01
P.11
DC injection brake operation
time
0～60.0s
0.5s
142
10-02
P.12
DC injection brake operation
voltage
0～30.0%
4.0%
142
10-03
P.151
Zero-speed control function
selection
0: There is no output at zero-speed.
0
143
1: DC voltage breaking
10-04
P.152
Voltage at zero-speed
control
0～30.0%
5.0%
143
10-05
P.242
DC injection brake function
before start
0: DC injection brake function is not available
before starting.
0
143
1: DC brake injection function is selected before
starting.
10-06
P.243
DC injection brake time
before start
0～60.0s
0.5s
143
10-07
P.244
DC injection brake voltage
before start
0～30.0%
4.0%
143
10-08
P.150
Restart mode selection
X0: No frequency search.
0
144
X1: Reserved
X2: Decrease voltage mode
0X: Power on once.
1X: Start each time.
2X: Only instantaneous stop and restart
10-09
P.57
Restart coasting time
0～30.0s
99999
144
99999: No restart function.
10-10
P.58
Restart cushion time
0～60.0s
10.0s
144
10-11
P.61
Remote setting function
0: No remote setting function.
0
145
1: Remote setting function, frequency setup
storage is available.
2: Remote setting function, frequency setup
storage is not available.
3: Remote setting function, frequency setup
storage is not available; the remote setting
frequency is cleared by STF/STR “turn off”.

Shihlin electric SC3-043-2.2K Specifications

General

Brand	Shihlin electric
Model	SC3-043-2.2K
Category	Inverter
Language	English